 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Chip LED Device LT1t73A series LT1t73A series s Outline Dimensions (Unit : mm) 2.75!1.45mm, 0.9mm Thickness, Compact Milky Diffusion Chip LED Devices s Radiation Diagram (Ta=25C) Milky diffusion -30 -20 -10 0 100 +10 +20 +30 +40 80 +50 60 0.3 0.5 0.3 0.6 0.2 0.3 -40 1 4 -50 Relative luminous intensity(%) 2.750.15 1.45 1.4 -60 +60 40 +70 20 +80 0.8 2 0.9 1.45 3 (4-R0.1) -70 -80 -90 0 +90 0.050.05 0.9 1.4 Pin connections 1 4 Cathode 2 3 Anode Unspecified tolerance:0.1 T type: Polarity faces in the opposite direction. s Absolute Maximum Ratings Power dissipation Forward current Peak forward current P IF IFM*1 Model No. Radiation color Radiation material (mW) (mA) (mA) LT1T73A LT1P73A LT1D73A LT1S73A LT1H73A LT1E73A LT1K73A Red(High-luminosity) Red Red Sunset orange Yellow Yellow-green Green GaAlAs on GaAs GaP GaAsP on GaP GaAsP on GaP GaAsP on GaP GaP GaP 66 23 85 85 50 50 50 30 10 30 30 20 20 20 50 50 50 50 50 50 50 (Ta=25C) Derating factor Reverse voltage Operating temperature Storage temperature Soldering temperature (mA/C) VR Topr Tstg Tsol*2 (V) (C) (C) (C) DC Pulse 0.40 0.13 0.40 0.40 0.27 0.27 0.27 0.67 0.67 0.67 0.67 0.67 0.67 0.67 5 5 5 5 5 5 5 -25 to +85 -25 to +85 -25 to +85 -25 to +85 -25 to +85 -25 to +85 -25 to +85 -25 to +100 -25 to +100 -25 to +100 -25 to +100 -25 to +100 -25 to +100 -25 to +100 350 350 350 350 350 350 350 *1 Duty ratio=1/10, Pulse width=0.1ms *2 For 3s or less at the temperature of hand soldering. Temperature of reflow soldering is shown on the below page. s Electro-optical Characteristics Model No. Forward voltage VF(V) TYP 1.75 1.9 2.0 2.0 1.9 1.95 1.95 MAX 2.2 2.3 2.8 2.8 2.5 2.5 2.5 Peak emission wavelength IF p(nm) (mA) TYP 20 660 5 695 20 635 20 610 10 585 10 565 10 555 Luminous intensity IF IV(mcd) (mA) TYP 20 7.0 5 1.2 20 9.0 20 7.8 10 3.7 10 4.7 10 1.9 Spectrum radiation bandwidth IF (nm) (mA) TYP 20 20 5 100 20 35 20 35 10 30 10 30 10 25 Reverse current VR IR(A) (V) MAX 4 10 4 10 4 10 4 10 4 10 4 10 4 10 Terminal capacitance Ct(pF) TYP 30 55 20 15 35 35 40 (Ta=25C) Page for characteristics (MHZ) diagrams 1 1 1 1 1 1 1 Lens type LT1T73A LT1P73A LT1D73A Milky LT1S73A diffusion LT1H73A LT1E73A LT1K73A devices catalogs, data books, etc. Contact SHARP 0 (Internet) Data forshown inoptoelectronic/power device is provided for in order to obtain the latest device specification sheets before using any SHARP device. sharp's internet.(Address http://www.sharp.co.jp/ecg/) (Notice) In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP LED Lamp PR series Characteristics Diagrams Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25C) 50 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 40 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(C) Ambient temperature Ta(C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25C) Duty Ratio vs. Peak Forward Current (Ta=25C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) 200 100 50 Peak forward current IFM(mA) 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(C) Forward current IF(mA) Duty ratio DR HD series Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25C) 50 Relative luminous intensity(%) 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward current IF(mA) Forward current IF(mA) 40 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(C) Ambient temperature Ta(C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25C) Duty Ratio vs. Peak Forward Current (Ta=25C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) 200 100 50 Peak forward current IFM(mA) 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(C) Forward current IF(mA) Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) devices catalogs, data books, etc. Contact SHARP 8 (Internet) Data forshown inoptoelectronic/power device is provided for in order to obtain the latest device specification sheets before using any SHARP device. sharp's internet.(Address http://www.sharp.co.jp/ecg/) (Notice) In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP LED Lamp HS series Characteristics Diagrams Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 Relative luminous intensity(%) (IF=20mA) 50 Forward current IF(mA) 40 Forward current IF(mA) 20 10 5 3 2 200 30 100 50 20 10 1 0 -25 0.5 1.0 20 10 1.2 1.4 1.6 1.8 2.0 2.2 2.4 -20 0 20 40 60 80 100 Forward voltage VF(V) Ambient temperature Ta(C) 0 25 50 75 85 100 125 Ambient temperature Ta(C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 500 (Ta=25C) Duty Ratio vs. Peak Forward Current 500 300 (Ta=25C) 50 Relative luminous intensity(%) Peak forward current IFM(mA) 200 Peak forward current IF(mA) 100 50 40 100 50 30 30 20 10 5 20 10 2 0 -25 0 25 50 75 85 100 125 1 0.1 0.2 0.5 1 2 5 10 20 50 10 5 1/50 1/20 1/10 1/5 1/2 1 Forward current IF(mA) Duty ratio DR Ambient temperature Ta(C) HY series Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25C) 50 Relative luminous intensity(%) 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward current IF(mA) 40 Forward current IF(mA) 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(C) Ambient temperature Ta(C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25C) Duty Ratio vs. Peak Forward Current (Ta=25C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) 200 100 50 Peak forward current IFM(mA) 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(C) Forward current IF(mA) Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) (Notice) 11 LED Lamp EG series Characteristics Diagrams Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25C) 50 Relative luminous intensity(%) 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward current IF(mA) Forward current IF(mA) 40 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(C) Ambient temperature Ta(C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25C) Duty Ratio vs. Peak Forward Current (Ta=25C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) 200 100 50 Peak forward current IFM(mA) 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(C) Forward current IF(mA) Duty ratio DR KG series Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25C) 50 Relative luminous intensity(%) 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward current IF(mA) Forward current IF(mA) 40 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(C) Ambient temperature Ta(C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25C) Duty Ratio vs. Peak Forward Current (Ta=25C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) Peak forward current IFM(mA) 200 100 50 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(C) Forward current IF(mA) Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) devices catalogs, data books, etc. Contact SHARP 0 (Internet) Data forshown inoptoelectronic/power device is provided for in order to obtain the latest device specification sheets before using any SHARP device. sharp's internet.(Address http://www.sharp.co.jp/ecg/) (Notice) In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP TR series Forward Current Derating Curve 70 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 Relative luminous intensity(%) (1F=20mA) 60 Forward current IF(mA) Forward current IF(mA) 50 20 10 5 3 2 200 40 100 50 30 20 10 0 -20 0 20 40 60 80 85 100 Ambient temperature Ta(C) 1 0.5 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 Forward voltage VF(V) 20 10 -20 0 20 40 60 80 100 Ambient temperature Ta(C) Peak Forward Current Derating Curve 700 Luminous Intensity vs. Forward Current(Note) 500 (Ta=25C) Duty Ratio vs. Peak Forward Current 500 (Ta=25C) 600 Relative luminous intensity(%) Peak forward current IFM(mA) 200 Peak forward current IF(mA) 0.2 1 2 5 10 20 50 100 50 200 100 50 30 500 400 20 10 5 300 10 5 200 100 2 0 -20 0 20 40 60 80 100 Ambient temperature Ta(C) 1 0.1 0.5 2 1 1/50 1/20 1/10 1/5 1/2 1 Forward current IF(mA) Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) |
Price & Availability of LT1S73A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |